Conductive Labs Support Forum
USB compatible (or not) devices list - Printable Version

+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: Hardware MIDI Connectivity (https://conductivelabs.com/forum/forumdisplay.php?fid=22)
+--- Thread: USB compatible (or not) devices list (/showthread.php?tid=1662)

Pages: 1 2 3 4 5 6

RE: USB compatible (or not) devices list - mumari - 06-05-2022

Waldorf Iridium works over USB as well.

RE: USB compatible (or not) devices list - Lizard of Oz - 06-16-2022

(08-11-2021, 06:10 PM)Jesse Johannesen Wrote: I think it bears mentioning that in order to say a device works, we should be able to plug it into the unit and power cycle it without issue. It may be worth giving that a shot on these "works" devices to see how they hold up.

Yesterday I tested a couple of devices, including the power-cycle test: 
  • Squarp Pyramid MK2 (OS 4.02): USB MIDI in and out work reliably, also after power-cycles  
  • MFB Dominion Club (v1.05): not working - receives MIDI after first connection to a host port, but once either the device is unplugged, or the device or the MRCC is power-cycled, it no longer connects reliably. No entry for the USB device is added to the labels.
  • Waldorf Blofeld (v1.25): exactly the same as Dominion Club
  • Elektron Syntakt (v1.01): no connection detected, no MIDI data sent or received
  • Elektron Digitakt  (v1.30B): no connection detected, no MIDI data sent or received
  • Elektron Digitone (v1.032a): no connection detected, no MIDI data sent or received

My MRCC is on version 1.1.052.

RE: USB compatible (or not) devices list - Nelson Baboon - 06-17-2022

I'm having great success with the Waldorf M connected to a usb port.

RE: USB compatible (or not) devices list - wick - 12-20-2022

can anyone report if this midi controllers work?
fader fox uc4,
midi fighter twister
novation launchpad mini mk3

RE: USB compatible (or not) devices list - Jesse Johannesen - 12-20-2022

According to the tracker:
https://conductivelabs.com/mrcc-usb-host-compatibility-tracker/

the fader fox EC4 works with the MRCC host ports, so I would say it's a good bet the uc4 would work.
The novation launchpad mini we tested was a mk1 and had issues, but worked with the cable that comes with the device. I have a MK3 mini but I couldn't track it down to test it, so I'll try it once it's been located and report back.
We haven't tested the MIDI fighter yet

RE: USB compatible (or not) devices list - User - 12-21-2022

Midi twister is working as well. With usb two-way communication, it even show status of cc parameters (led status, when changed by other controller).

RE: USB compatible (or not) devices list - wick - 12-21-2022

(12-21-2022, 09:15 AM)User Wrote: Midi twister is working as well. With usb two-way communication, it even show status of cc parameters (led status, when changed by other controller).

thanks for let know the the midi fighter twister is working

RE: USB compatible (or not) devices list - Jesse Johannesen - 12-25-2022

I was able to find my launchpad mini MK3 and it works with the USB host ports.

RE: USB compatible (or not) devices list - wick - 12-28-2022

(12-25-2022, 01:14 PM)Jesse Johannesen Wrote: I was able to find my launchpad mini MK3 and it works with the USB host ports.

thanks

RE: USB compatible (or not) devices list - wick - 01-20-2023

I can confirm faderfox uc4,midi fighter twister, launchpad mini mk3 works 100%