+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: The NDLR (https://conductivelabs.com/forum/forumdisplay.php?fid=1)
+--- Forum: MIDI Connectivity (https://conductivelabs.com/forum/forumdisplay.php?fid=5)
+--- Thread: Clock out stuck at 30 or 300 BMP (/showthread.php?tid=1481)
Clock out stuck at 30 or 300 BMP - zarar - 03-27-2021
Hi,
Just got my NDLR and started playing around with it, so far so great when triggering my different synths.
However, when i try to get clock out to my drum machines, the clock they receive is either stuck at 300 BMP (if i use USB) or 30 BMP (if using DIN5 midi).
My setup is as follows:
NDLR -> RK006 -> Analog4, MachineDrum, Xbase09, Tanzmaus etc.
Is there a clock multiplier or divider for the clock being sent out that i've missed in the settings?
RE: Clock out stuck at 30 or 300 BMP - zarar - 03-27-2021
Just realized i had my Reface CS connected to the RK006 via USB to receive the PAD data from NDLR. Without it it works fine.
RE: Clock out stuck at 30 or 300 BMP - Jesse Johannesen - 03-27-2021
Does that solve this mystery or do we still need to take a look at this further?
Jesse
RE: Clock out stuck at 30 or 300 BMP - zarar - 09-13-2021
This can be closed, thanks!