+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: MRCC Feature Requests (https://conductivelabs.com/forum/forumdisplay.php?fid=25)
+--- Thread: MRCC multiple destinations (/showthread.php?tid=1725)
MRCC multiple destinations - MickG - 08-27-2021
On the ROUTING page, there is no indication that you might have a source routed to multiple destinations.
The display is typically: 1>4
There's no indication that 1 might also routed to 6 and/or 11 and/or P05.
When a multiple selection has been made, e.g. in the above example, would it be possible to add a suitable symbol after the current destination ID?
So it might look like:
1>4...
1>4 *
1>4 +
or maybe even this:
1>4 +6 +11 +P05
RE: MRCC multiple destinations - fgeorgy - 08-27-2021
I vote for this. That would be so helpful.
RE: MRCC multiple destinations - Jesse Johannesen - 08-30-2021
I'll ask Steve if this is possible, but my best guess is that this would be difficult to make happen.
Jesse
RE: MRCC multiple destinations - MickG - 08-31-2021
OK - thanks