+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: General Support (https://conductivelabs.com/forum/forumdisplay.php?fid=14)
+--- Thread: Non-Working Din Input (/showthread.php?tid=1951)
Non-Working Din Input - Accent - 05-31-2022
Hi all, got the MRCC a couple months ago in the middle of a studio rehaul, and have been slowly troubleshooting to integrate it into my rig. It’s been one of the best things I’ve gotten for my studio. However, I’ve gotten to the end of my troubleshooting and it appears midi input #5 is not working. Swapping devices to other inputs works, and nothing I send to the port seems to be transmitted to the outputs per the midi message monitor. Is there anything else I can do to troubleshoot? Or to try a factory reset to see if that helps? I’m hoping the retailer can work with me if the port is really not working, but would really like to get this working and not have to send it back.
RE: Non-Working Din Input - Jesse Johannesen - 05-31-2022
Hey Accent,
Send me an email at support@conductivelabs.com and we can set up a time to look at it. If it's faulty we can help get you sorted out.
Jesse
RE: Non-Working Din Input - Accent - 05-31-2022
(05-31-2022, 07:29 PM)Jesse Johannesen Wrote: Hey Accent,
Send me an email at support@conductivelabs.com and we can set up a time to look at it. If it's faulty we can help get you sorted out.
Jesse
Hi Jesse,
Thank you, just sent an email over.