+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: General Support (https://conductivelabs.com/forum/forumdisplay.php?fid=14)
+--- Thread: BUG: cannot move a USB device to a different port (/showthread.php?tid=2006)
BUG: cannot move a USB device to a different port - tutenchamun - 08-13-2022
I am using a BOSS rc505-mkII as a general clock source.
Now I wanted to rearrange it from USB port B to USB port A.
... but whatever port I change the rc505 to, the activity monitor would always map the device to port B (as in my very first setup)
This breaks the hardware button routing for this device on MRCC.
... since the rc505 now is physically connected to port A but MRCC still maps/consideres it to be connected to port B.
RE: BUG: cannot move a USB device to a different port - Jesse Johannesen - 08-14-2022
I'm not sure I quite understand the issue precisely. Can you send me an email at support@conductivelabs.com I'll set up a zoom call and we can talk it over if that's ok.
Jesse