+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: MRCC Advanced Configuration (https://conductivelabs.com/forum/forumdisplay.php?fid=24)
+--- Thread: MRCC start stop clock via midi cc (/showthread.php?tid=2374)
MRCC start stop clock via midi cc - mikemusic - 11-17-2024
hi does anyone know if there's a way to send midi cc to the MRCC for start/stop messages.
there is midi cc 30 for clock enable, but not cc for start stop of the clock... am I missing something, or is there a chance this could be in a future update?
I just wanna keep the clock enable on and then start and stop the clock via a midi controller
mikael
RE: MRCC start stop clock via midi cc - Jesse Johannesen - 11-17-2024
I don't think there is an implementation for this, however it shouldn't be necessary, you should be able to just route the MIDI transport messages from your controller through to each output you have listening, filtering any unwanted data, and that should work to start and stop the devices downstream. Does that seem like it might work?