+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: The NDLR (https://conductivelabs.com/forum/forumdisplay.php?fid=1)
+--- Forum: General Support (https://conductivelabs.com/forum/forumdisplay.php?fid=2)
+--- Thread: PAD gate signals (/showthread.php?tid=2419)
PAD gate signals - jeff s - 03-09-2025
Hello. I wonder if the PAD feature of the NDLR sends gate signals. Specifically, when a modulator changes note positions, are gate open/close signals sent, or are only note on/off signals sent?
RE: PAD gate signals - House de Kris - 03-12-2025
NDLR only connects via MIDI (either 5-pin DIN or USB). As such, there are only Note on/off signals. Gate state is implied by interpreting note on/off commands.
RE: PAD gate signals - Jesse Johannesen - 03-12-2025
That said it's possible to turn on and off a part with modulators in the MOD matrix.
RE: PAD gate signals - jeff s - 03-16-2025
(03-12-2025, 07:39 AM)House de Kris Wrote: NDLR only connects via MIDI (either 5-pin DIN or USB). As such, there are only Note on/off signals. Gate state is implied by interpreting note on/off commands.
Thank-you.
(03-12-2025, 11:03 PM)Jesse Johannesen Wrote: That said it's possible to turn on and off a part with modulators in the MOD matrix.Thank-you.