01-28-2019, 02:11 PM
Hi there,
I've also got a MIO10 and can report that transpose does work with this MIDI router once things are set up properly.The first thing I''d check is that you're using the same pair of MIDI ports for the incoming and outgoing connections between the MIO10 and the NDLR (i.e. IN A & OUT A or IN B & OUT B). The MIDI thru in the NDLR only sends to certain ports, MIDI A IN is only sent to MIDI A OUT and USB 1 (MIDI B IN goes out to MIDI B OUT and USB 2). The first time I tried it I had my NDLR connected via IN B & OUT A and it took me a while to track down the reason.
If that's not the case then I'm guessing it's something to do with the routing setup for the individual MIO10 ports, which may be a little more tricky to diagnose.
Cheers,
Ian
I've also got a MIO10 and can report that transpose does work with this MIDI router once things are set up properly.The first thing I''d check is that you're using the same pair of MIDI ports for the incoming and outgoing connections between the MIO10 and the NDLR (i.e. IN A & OUT A or IN B & OUT B). The MIDI thru in the NDLR only sends to certain ports, MIDI A IN is only sent to MIDI A OUT and USB 1 (MIDI B IN goes out to MIDI B OUT and USB 2). The first time I tried it I had my NDLR connected via IN B & OUT A and it took me a while to track down the reason.
If that's not the case then I'm guessing it's something to do with the routing setup for the individual MIO10 ports, which may be a little more tricky to diagnose.
Cheers,
Ian