Chord Sequencer Issue

[Jesse Johannesen]

Hi,

i have fw 1.1.066

when I run the chord sequencer for example on the pad it randomly start with an unexpected stroke of the first chord (sometimes every 2,3,4,5 tries) then it waits a moment (not always the same amount of time) and then it starts to send the correct sequence.
If the chord sequencer is newly opened there is no red box showing the song part that is playing and during this unexpected first chord the red box doesn't show up appearing later when the correct sequence starts.
Where could this first random chord come from?

thank you, bless

Hey Mescalina,
I am not 100% sure I understand what is happening exactly. It sounds like what's happening is that with the Chord sequencer enabled and all parts stopped, if you enable the pad (for example), the pad initially plays a chord but not in time with the sequence?

Do you mean by "sometimes every 2,3,4,5 tries", that it doesn't always occur but does happen more often than not? or the opposite, that it happens but sometimes it works right 5 times before experiencing the issue again?

I'll try to see if I can get mine to do this and let you know what I find out. In the mean time, I think there are a few things you can try:
A. you might want to update to the newest firmware. The instructions can be found at:
https://conductivelabs.com/download/

and you can find the most recent firmware here:
https://conductivelabs.com/forum/forumdi...php?fid=10

I can't remember if we've addressed any bugs in the Chord Sequencer but it can't hurt.

B. You could take a look at the settings menu entry for Pad quantizer and if it's off, try turning that on to one of the options to see if that's the issue.

Thanks for letting me know, it's really helpful when these kinds of things get reported, because then we can get them fixed. I'll report back and let you know what I find out as far as getting my device to recreate this issue.

Take care,
Jesse Johannesen