(09-05-2020, 10:13 PM)Jesse Wrote: I am not 100% sure I understand what is happening exactly. It sounds like what's happening is that with the Chord sequencer enabled and all parts stopped, if you enable the pad (for example), the pad initially plays a chord but not in time with the sequence?
Do you mean by "sometimes every 2,3,4,5 tries", that it doesn't always occur but does happen more often than not? or the opposite, that it happens but sometimes it works right 5 times before experiencing the issue again?
I'll try to see if I can get mine to do this and let you know what I find out. In the mean time, I think there are a few things you can try:
A. you might want to update to the newest firmware. The instructions can be found at:
https://conductivelabs.com/download/
and you can find the most recent firmware here:
https://conductivelabs.com/forum/forumdi...php?fid=10
I can't remember if we've addressed any bugs in the Chord Sequencer but it can't hurt.
B. You could take a look at the settings menu entry for Pad quantizer and if it's off, try turning that on to one of the options to see if that's the issue.
Thanks for letting me know, it's really helpful when these kinds of things get reported, because then we can get them fixed. I'll report back and let you know what I find out as far as getting my device to recreate this issue.
Take care,
Jesse Johannesen
Hi Jesse, thanks for taking the time to answer.
with sometimes I mean that it's very random, sometimes it works properly for 4-5 times in a row and then is wrong for 2 after, sometimes it's more like 1 right and 1 wrong, I can surely say that it's totally random but that it is very rare to have more than 5 correct beginnings in a row.
I'm gonna try with the leatest fw, I didn't do it cause it's still a beta release. Am I gonna lose my patterns and chord sequences when I update?
The pad quantizer is set to 1/4 but any other settings, including the off one doesn't seem to fix the issue.
take care you too,
Claudio
Hi Jesse,
I just installed the 1.1.070 fw and the issue is still there
Now i have another little bug that wasn't present before:
If I arm a track, then I close and reopen the chord sequencer menu when I turn the arm knob to the left to disarm the sequence it doesn't work unless I first turn the knob to the right.
Here is a video showing the issue, the ndlr is connected to a microfreak. I've tried using the clock via midi and via clock out but it doesn't make any difference.
I've also tried to connect the ndlr to an ipad via usb and the issue is still present so it's not microfreak related.
https://youtu.be/s-QsK8ydeOI
Another issue I've noticed (it was present also with the 066 fw) is that if I start the pad and then stop it, very often the last note gets stuck and I need to press the start all button a couple of times in order to stop it.
I've also just noticed another small issue ( don't hate me
)When I have this phantom chord at the beginning the red box that shows which section step is active sometimes is out of synch with the sound is generating.