08-07-2021, 06:26 PM
If I understand your question correctly, anything connected to the same MRCC is routed as normal. Things that are being routed between two MRCCs are routed from whichever MRCC has the source, the selection for the destination is made there using the 'Y' button next to output 12, the same as when you route to a Remote 7. So in your example, if you're sending from the Keyboard on MRCC-1 to the Pyramid on MRCC-2, select the source for the keyboard on #1, press and hold the 'Y' button also on #1, and select the out port there on MRCC-1 (even though the Pyramid is on #2). I don't have my second MRCC yet to try this, but it did work for the Remote 7. All the details are on p. 49 of the manual, near the bottom. Hope this helps.