08-08-2021, 10:35 AM
Whenever I'm trying some new routing/filtering/etc with two MRCCs, I *try* to use the DIN/TRS ports as much as possible to prove out the concept. That eliminates the additional step of selecting a virtual port on the USBs/PC port and one less variable to debug. Once I know I have that correct, then I'll move it to the USB.
Or, if I have to use the USB, then I'll set it all up on a single MRCC and once that is OK, delete that route and use the "Y" button to send it across to MRCC #2.
I've had too many weird issues that ended being traced down to a bad cable, simple misconfiguration, or a basic misunderstanding on my part, so the less variables the better to start.
I also tend to press and hold an Input button (and Y button) to see what the current routing is for that port just to verify I have things selected the way I want.
Or, if I have to use the USB, then I'll set it all up on a single MRCC and once that is OK, delete that route and use the "Y" button to send it across to MRCC #2.
I've had too many weird issues that ended being traced down to a bad cable, simple misconfiguration, or a basic misunderstanding on my part, so the less variables the better to start.
I also tend to press and hold an Input button (and Y button) to see what the current routing is for that port just to verify I have things selected the way I want.