The MRCC or MioXL...

[Jesse Johannesen]

So I am seeing a few issues with some of these use cases. Many work but there are some definite potential red flags: First off, the OP1 is reported as not being compatible with the USB host ports, along with all the Electron boxes we've tested. No one has tried the Heat as far as I know, but I would guess it's probably the same scenario. I think the MPC live works with the PC port but not the host port, but I will look at the Compatibility Tracker and report back, the DIN ins and outs work perfectly fine though. Ipad is only compatible via the camera adaptor to the PC port, or via a audio interface/MIDI interface with DIN outs. Mackie is untested. I don't remember if Polybrute is USB host tested yet or not, but the MPE / poly aftertouch should be fine over DIN either way. Keystep Pro should be fine over USB as long as it's powered externally to the USB port (Wall power).

Here is a link to the MRCC host port compatibility tracker:
https://conductivelabs.com/mrcc-usb-host...y-tracker/