12-09-2022, 04:58 PM
Yes, I can confirm this routing is possible, if you're having trouble with this let me see if I can clarify the process.
1 Send MIDI from computer to output port number of your choice
2 On the MRCC press and hold the left side PC port button, the row of 12 outputs should light up blue/white.
3 While still holding the button, select whichever output port number you've decided to send that MIDI data to and press that ports button, it will light up brighter
4 release the all buttons the PC port blue light will be lit, this indicates that we're now routing the PC port
5 press and hold the green right side PC port button. The 12 output ports will light up greenish white
6 while still holding the button, press the port button of the input port that you wish to route the MIDI data back into the PC on. It will light up brighter
7 release all buttons your signal is now being routed back to the computer
1 Send MIDI from computer to output port number of your choice
2 On the MRCC press and hold the left side PC port button, the row of 12 outputs should light up blue/white.
3 While still holding the button, select whichever output port number you've decided to send that MIDI data to and press that ports button, it will light up brighter
4 release the all buttons the PC port blue light will be lit, this indicates that we're now routing the PC port
5 press and hold the green right side PC port button. The 12 output ports will light up greenish white
6 while still holding the button, press the port button of the input port that you wish to route the MIDI data back into the PC on. It will light up brighter
7 release all buttons your signal is now being routed back to the computer