Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
*SOLVED* Pad noise / glitchy
#4
Thanks for the input, CL Team.

In my efforts to better diagnose/define the problem factors, along with the suggestions provided, I did stumble upon the culprit.

No midi CCs showed on MRCC during monitor of PAD changes , no "non-note" midi input indicated at Blo (LED) --  even with distortion audible
Pad Velo (Menu/Settings 2) had no impact - - buuuuuut, when exiting out of menu (after changing velo), it glitched briefly ?!

(explore explore explore) --

All PAD commands (knobs 1,2), Menu/setting2, and TEMPO induce glitch
No other devices or Control inputs (Drone/Mot1,2, Chords, Key, Mode) induce glitch

'cause --

 it's the Clock. (NDLR as Master clock)

    --and ---

 Blofeld patches which use fx: CLK.Delay  (timed/sync'd delay).  Change CLK.Delay to regular delay - boom. Always clean, under any circumstances.

So it is an 'integrated' problem -- NDLR as clock and Blo/clk.delay. Easy enough work-around (change delay, or maybe change clock source (haven't tried)) . . .. but do you 'expect' PAD changes (even LFO driven) to 'wiggle' the clock?
Reply


Messages In This Thread
*SOLVED* Pad noise / glitchy - by FolkDub - 01-04-2023, 12:59 AM
RE: Pad noise / glitchy - by Jesse Johannesen - 01-06-2023, 02:12 PM
RE: Pad noise / glitchy - by Darryl - 01-11-2023, 02:13 PM
*SOLVED*: Pad noise / glitchy - by FolkDub - 01-18-2023, 09:28 PM

Forum Jump:


Users browsing this thread:
1 Guest(s)