04-17-2023, 09:04 AM
(This post was last modified: 04-17-2023, 09:07 AM by funktree.
Edit Reason: tweak
)
Latest official firmware, tried this with 3 synths J6 (Roland), XFM (sonicware) JDXI (Roland) . At First I though the voices are "eaten" that is why I hooked up JDXI that has unlimited voices..
1. Turn on unit
2. Make sure that the Pad channel is not modulated (turn all mods to 0%) and no song mode is engaged.
3. Set the MIDI OUT to all or 1,2 whatever so you hear the synth. Use only PAD turn of Motifs and drone.
4. Set the range to 5 voices
5. Set the strum to slower so you can HEAR how many notes are played back
6. Set the Spread to 0
All is nice in this mode, when you click any button to play a chord 5 notes plays back
7. Change the Spread to 1
8. Play a few chords by clicking the clicky NDLR buttons
Bug:
9. Not all 5 notes are played back. I would say that mode #3 root only + closed voicing would produce less than 5 notes played if you go out of range with the position knob. But mode #2,#5,#6 should play 5 notes back
10. If you have problem to reproduce, please turn on 7th chord type it'l get to this bug faster.
If this issue does not exists in lower version of firmware please point to me to one. I spent a few hours on this, reading forums, fresh manual and didn't know if I was doing something wrong but JDXI proved to me that this is most likely a bug
My NDLR was collecting dust for 1-2 years , I hope it will not go back to that
This could be related to NDLR not sending Note OFF message on the Pad channel right ?
Also I noticed that even though I set the voices to 5 or 6 sometimes when you change the Spread the number of voices on the display changes up or down by one .
Thanks!
1. Turn on unit
2. Make sure that the Pad channel is not modulated (turn all mods to 0%) and no song mode is engaged.
3. Set the MIDI OUT to all or 1,2 whatever so you hear the synth. Use only PAD turn of Motifs and drone.
4. Set the range to 5 voices
5. Set the strum to slower so you can HEAR how many notes are played back
6. Set the Spread to 0
All is nice in this mode, when you click any button to play a chord 5 notes plays back
7. Change the Spread to 1
8. Play a few chords by clicking the clicky NDLR buttons
Bug:
9. Not all 5 notes are played back. I would say that mode #3 root only + closed voicing would produce less than 5 notes played if you go out of range with the position knob. But mode #2,#5,#6 should play 5 notes back
10. If you have problem to reproduce, please turn on 7th chord type it'l get to this bug faster.
If this issue does not exists in lower version of firmware please point to me to one. I spent a few hours on this, reading forums, fresh manual and didn't know if I was doing something wrong but JDXI proved to me that this is most likely a bug
My NDLR was collecting dust for 1-2 years , I hope it will not go back to that
This could be related to NDLR not sending Note OFF message on the Pad channel right ?
Also I noticed that even though I set the voices to 5 or 6 sometimes when you change the Spread the number of voices on the display changes up or down by one .
Thanks!