NDLR via MRCC no activity when using USB
(11-09-2024, 10:04 PM)Salieri Wrote:(11-09-2024, 09:12 PM)Jesse Johannesen Wrote: I am not seeing that you are routing USB A to anything in this scenario, can you please pick one of the USB A inputs (left button below port + any of the first 4 ports out to select) then select an output to route it to, (with no other buttons pressed press a button below one of the output ports, it will become lit blue). Then MIDI traffic should become visible on the routing.
Let me know if that isn't happening, preferably via email at Support@Conductivelabs.com.
Jesse
ATM, I'm routing port A out (green LED) to all DIN outs with a synth connected (DIN out 2 to 5, 1 is currently unused). MRCC's activity matrix (Ax4 and U1) shows the yellow rectangles. I've tried all 4 routes using the same virtual line and all using a separate line.
I had to update MRCC's firmware to the latest version to make it work. Everything A-OK now.
After I updated MRCC's firmware, too, everything works now.