04-10-2023, 04:27 PM
Hey, yeah we do host these forums for support (from us as well as from other users in the community), but it's not always the fastest way to get assistance. The fastest way to get support is via email at the Support@conductivelabs.com address, which I look at multiple times a day usually.
Interesting problem in this case, I'm not sure what could cause that, but it might be worth trying setting up some midi filtering on the routing between the two if you aren't sending sysex messages from the devices. There are occasional compatibility issues with USB host ports and certain devices, however we've had beta testers using the Linnstrument and none have reported anything like this.
It's a little limited but you may be able to use the onboard midi event viewer to look at those notes as they're sent through, then as an added step in the analysis pass the DIN output of that port back through an input (loop it back through the MRCC) then monitor those notes to see if the data being sent is identical.
Send me an email and we can follow up with it over there to see if we can get to the bottom of the issue.
Interesting problem in this case, I'm not sure what could cause that, but it might be worth trying setting up some midi filtering on the routing between the two if you aren't sending sysex messages from the devices. There are occasional compatibility issues with USB host ports and certain devices, however we've had beta testers using the Linnstrument and none have reported anything like this.
It's a little limited but you may be able to use the onboard midi event viewer to look at those notes as they're sent through, then as an added step in the analysis pass the DIN output of that port back through an input (loop it back through the MRCC) then monitor those notes to see if the data being sent is identical.
Send me an email and we can follow up with it over there to see if we can get to the bottom of the issue.