02-27-2019, 05:40 PM
Our band is experimenting with 2 NDLRs in our setup, one for each pile of synths. I'm wondering if there's a simpler way of taming 2 at the same time.
Here's our current setup:
Clock: NDLR 1 (master) midi out -> NDLR 2 midi in
Chord degree/shape: Keystep -> midi splitter -> NDLR 1 & NDLR 2 midi in
This allows us to sync clock and have 1 keyboard control for the chord changes on both units, but we still need to manually sync Key and Scale on each device (which is pretty fiddly do to the knob resolution). And it requires a midi splitter plus separate cables for clock and chord sync.
Our ideal solution would look like this:
Keystep (chord control) -> NDLR 1 (clock master, key, scale, chord degree, chord shape) -> NDLR 2 (clock slave, key slave, scale slave, chord degree slave, chord shape slave)
Here's our current setup:
Clock: NDLR 1 (master) midi out -> NDLR 2 midi in
Chord degree/shape: Keystep -> midi splitter -> NDLR 1 & NDLR 2 midi in
This allows us to sync clock and have 1 keyboard control for the chord changes on both units, but we still need to manually sync Key and Scale on each device (which is pretty fiddly do to the knob resolution). And it requires a midi splitter plus separate cables for clock and chord sync.
Our ideal solution would look like this:
Keystep (chord control) -> NDLR 1 (clock master, key, scale, chord degree, chord shape) -> NDLR 2 (clock slave, key slave, scale slave, chord degree slave, chord shape slave)
