+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: MRCC Feature Requests (https://conductivelabs.com/forum/forumdisplay.php?fid=25)
+--- Thread: New input routing functions - mute / solo (/showthread.php?tid=2326)
New input routing functions - mute / solo - RadekPilich - 07-19-2024
Mute / solo for routings should work in relation to a single input port. They should be remotely controllable, possibly via note on/off messages.
This would be useful for example when having a single "universal controller" input (i.e. Faderfox EC4, Electra One, or simply a master keyboard controller) with configurations for multiple devices with overlapping midi channels that are spread across multiple outputs, where the channels are obviously not overlapping on a single output (i.e. 50 channels on 4 outs, with most of them being utilized on 3 or 4 ports, each for a different device).
So when having devices on 4 outputs and having all those outputs mapped to the controller input, it would be possible to remotely from the controller itself mute the routings to the outputs 1-3 and only control devices on output 4 until deciding it's time to control devices on output 2 and soloing that routing.
I realize this could be accomplished by manually creating and removing routings and / or by having multiple presets and toggling between them, but for my case, that seems much more complicated then being able to solo / mute routings remotely ideally while having a visual feedback on the MRCC LEDs.