+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: General Support (https://conductivelabs.com/forum/forumdisplay.php?fid=14)
+--- Thread: What is a Remote7 or R7? (/showthread.php?tid=2422)
What is a Remote7 or R7? - IndieMurph - 03-11-2025
I was reading thru the MRCC manual and came across a reference to a Remote7 (R7) but I have no idea what that is. I checked the products page. Nothing there. Eventually, I will be interested in connecting two MRCCs for additional MIDI routing to more synths.
RE: What is a Remote7 or R7? - House de Kris - 03-12-2025
Perhaps this helps?
https://conductivelabs.com/product/mrcc-remote-7/?srsltid=AfmBOoouoDc52CPSIXaNbLnnvcJOLMcLuAFhSCzLjbCbZVYL78_QfbY4LPc
RE: What is a Remote7 or R7? - Jesse Johannesen - 03-12-2025
The Remote 7 is an expander for the MRCC which allows you to either copy the first 5 ports output to the DIN outputs of the device (with 2 ports copied to both DIN and 3.5mm, hence 7). It is also possible to send individual routings to the 5 output targets by changing a setting and using the remote (Y guy) routing button on the MRCC.
If you want to connect 2 MRCCs you can with the same shielded cat 6 cable, and you can even use a special splitter to route to both the second MRCC as well as copying ports 1-5 to the Remote 7. We have a bunch of the splitters, and if you buy 2 MRCCs and a Remote 7, hit me up (at support@Conductivelabs.com) and we will chuck one of the splitters in with the order for free.