Hello
I've tested a mrcc for one week, time to share USB connectivity experience.

-Great news :
- the Beatlecrab Vector 2 in/out works like a charm on usb.
-CME widibud works fine too
-Already known :
 SQ1 out is ok with usb to mrcc, but to be synced it only works with "sync in" trs plug
-Predictable disappointment :
CME/Waveidea Bitstream3x does not work on usb ports
-More confusing : 
Arturia Beatstep pro works a little moment then the mrcc freezes systematicaly. 
BSP does not seem to work on usb, and I can't figure out why, as it is supposed to be mrcc friendly.

Cheers

I have a hardware sequencer that I would like to be the master clock and act as conductor to all of my other gear. The problem with Start/Stop is that it starts everything on beat 1, bar 1. I know I can filter out start stop messages, but can I map a PC message in to a Start/Stop out? That way if I want to start another sequencer, The master sequencer could send out a PC during a step and start a slave sequencer.

Hello Everybody

I have noticed a problem with the modulation matrix

I use LFO1 (with default settings) to modulate Pad Position

The Mod amount is 25%

The Mod range is 20 to 44

The range of Pad is 1 note

It works fine when I push button I : notes are played one at a time 

But when I push button II , notes from the previous chord are stuck

I have checked with MidiOx and it seems that some "Note off" events are missing


TIMESTAMP IN PORT STATUS DATA1 DATA2 CHAN NOTE EVENT             
    940038  1  5    147    52  127    4  E  3 Note On             
    940163  1  5    147    48  127    4  C  3 Note On             
    940164  1  5    131    52    64    4  E  3 Note Off             
    940664  1  5    147    43  127    4  G  2 Note On             
    940664  1  5    131    48    64    4  C  3 Note Off             
    941039  1  5    147    40  127    4  E  2 Note On             
    941040  1  5    131    43    64    4  G  2 Note Off             
    941539  1  5    147    36  127    4  C  2 Note On             
    941540  1  5    131    40    64    4  E  2 Note Off             
    942039  1  5    131    36    64    4  C  2 Note Off             
    942039  1  5    147    40  127    4  E  2 Note On             
    942539  1  5    131    40    64    4  E  2 Note Off             
    942539  1  5    147    43  127    4  G  2 Note On             
    942913  1  5    131    43    64    4  G  2 Note Off             
    942914  1  5    147    48  127    4  C  3 Note On             
    943414  1  5    131    48    64    4  C  3 Note Off             
    943414  1  5    147    52  127    4  E  3 Note On             
    943789  1  5    131    52    64    4  E  3 Note Off             
    943790  1  5    147    55  127    4  G  3 Note On     => this note never gets a Note Off event         
    944788  1  5    147    53  127    4  F  3 Note On             
    945289  1  5    147    50  127    4  D  3 Note On             
    945289  1  5    131    53    64    4  F  3 Note Off             
    945789  1  5    147    45  127    4  A  2 Note On             
    945789  1  5    131    50    64    4  D  3 Note Off             
    946060  1  5    131    45    64    4  A  2 Note Off      

Maybe I am doing something wrong

Anyway , thanks for reading

Have a nice day

Alain

hello, first post here.

I currently have the NDLR sending MINI ch 1-2-3-4 for motifs, pads and drone, efficiently to 4 separate machines. It is all routed out of MIDI OUT A port and into the MRCC which is then rerouting.
No problem there, everything is working well, I can individually start and stop parts or I can start them all together and stop them all together.
No problem.

But.

When I want to use the NDLR to send a clock and start&stop to my drum machine, through MIDI OUT A hell breaks lose.
The error is that while the drum machine starts and stops and clocks correctly, all parts start at the same time even if I'm only playing a motif or a pad or any one of them. Furthermore, there seems to be Midi leakedge between the parts as it seems the machines are overlapping notes from other parts they should not be playing.

This is the procedure which gives me the error:

I go to settings page 1/3
Select Midi Out: MIDI A strt/stop
Press play on any of the four bottom buttons.

I have checked all my midi routing for loops and such, but there is no such problem.

Please help! XD
Thanks in advance!

Are the MRCC and the 880 the same except for the number of inputs/outputs? Or are there some features one has and the other doesn’t? If I’m going to buy one do I go for the MRCC and never worry about having enough MIDI connections?

Hey! I'm trying to use an arp with Novation Launchkey mini, and it goes crazy: notes get stuck and play forever.
I guess it could be happening because Launchkey doesn't send Note-Offs, but rather sends Note-Ons with zero velocity.
I'm using MRCC_v1.1.075_08-23-2023.hex firmware.

Hello I have an mrc880 and suddenly It doesn't turn on when I connected to my Mac and it used to work perfectly until today, when I connect the mrc880 to another power device it turns on perfectly but not when I connect it to my m3 Mac.

help!

Hello Everybody and Happy New Year 

I have a problem with the pattern editor

I want to make some "Berlin School" (Tangerine Dream , Klaus Schulze) style patterns 

So in the pattern editor I have done this

Chord Mode

3 steps

1st step has value 1
2nd step has value 3
3rd step has value 4

so when i push I button I get C2 G2 C3 which is fine

when I push II button I get D2 A2 D3 which is fine

but when I push III button I get B1 G2 B2 in stead of E2 B2 E3

and other buttons give also strange results

Is ther something I'm missing ??

My goal is to have what could be called for a guitar player "power chords" (root , fifth , root octave+1)

Is it something possible or not ??

Thank You for reading 

Have A nice Day

Alain

I have a Maschine Mikro that I wonder if I can use with the MRCC? To put in midi mode you can hold shift + native instruments key which is how I use it on the PC.
When I plug into the MRCC it boots up but then is unresponsibe when I press this key combo.
It's such a good little controller, has anyone managed to use it with MRCC?
Any tips or ideas on how to get it working?

For authors working with dedicated publishers, ensuring smooth delivery of your published books is a priority. With reliable Shipping Help and Customer Care, poetry publishers UK provide assistance for tracking shipments, resolving delivery issues, and managing bulk orders. Whether you're distributing your poetry collection to bookstores or sending signed copies to readers, the support team ensures timely and efficient service, helping you focus on sharing your work with the world.